What Is Ghost Immobiliser Problems? History Of Ghost Immobiliser Problems In 10 Milestones

Protect Your Pride And Joy With The Ghost Immobiliser

ghost alarm installation Immobiliser will protect your valuable property from theft. It's discreet and does not require additional key fobs.

The device uses existing buttons in your vehicle (steering wheel, door panels & centre console) to create a unique changeable pin code sequence that can be up to 20 presses. This will then allow your vehicle to begin.

Simple process to change the PIN code

With the increasing rate of vehicle theft, many owners are looking to improve their security. There are a myriad of aftermarket security devices available including tracking systems, immobilisers and alarms. They're not all equally effective at protecting your car. While a tracking device can assist in finding your car in the case of theft, it can not prevent the crime from happening in the first in the first place. An immobiliser, on other hand, does exactly what it says on the label: it shuts off the engine of your car so that it is unable to be started. The Autowatch Ghost immobiliser is one of the most advanced options on the market, making it almost impossible for thieves to take your vehicle.

The ghost device makes use of the buttons on your car to generate a unique sequence that must be entered in order for the engine to start. This can be accomplished using the indicator stalk or window buttons. There is also a mobile app that can be used as an emergency PIN override, allowing the driver to operate their vehicle without the button sequence. This is a great option when you wish to donate your car to valet parking or for servicing. The immobiliser remains in operation.

The Ghost is a unique and ingenious device that is used in conjunction with the buttons of your car rather than as a separate unit. It's not just an effective deterrent to theft of your vehicle, but it can be used on future vehicles you own. This makes it a better investment than a traditional wheel lock.

Small device that is weatherproof

The Autowatch ghost immobiliser is an advanced security system that guards your pride and joy against key cloning, hacking & ECU swapping. It is a tiny weatherproof device that connects with the ECU of your vehicle directly over the CAN bus to stop the motor. It can be fitted into the vehicle without any wiring and has been thoroughly tested to ensure compatibility with all vehicles. It is also resistant against jamming devices which are a typical technique used by thieves to bypass immobilisers.

The benefit of CAN data over traditional systems is that they operate silently. It is not able to be detected by sophisticated RF scanning and code-grabbing techniques as well as recognized by conventional diagnostic tools. The Autowatch Ghost does not use LED indicators and instead uses buttons in your vehicle, such as the steering wheel, centre console, or doors, to create a unique disarming sequence. You can even create a sequence that is as long as 20 presses to increase security. The iPhone app allows one, authorized connection with a pairing code that is unique to the ferrari ghost installer and the communication between the two devices is encrypted.

The Ghost will stop car thieves from putting in a new ignition key or replacing the ECU to bypass the immobiliser. The engine will only run when a valid PIN code has been entered. It is able to be operated temporarily in Valet/Service mode (with the appropriate parameters, like 30mph speed limit) which means you can hand your car to valet or service without having to enter an entry code.

Each vehicle is tested

The autowatch ghost 2 immobiliser Ghost is the first aftermarket immobiliser CANbus. It can be connected to the vehicle's wiring and to the engine control unit (ECU). The device intercepts signals to stop your car from operating normally until you enter a specific code. The system can be activated or deactivated by using your smartphone app without the need for extra wires.

The factory-installed immobilisers function by using a transponder that is built into the key. It transmits a message to the ECU. The car will start if the correct code is transmitted. However, if a transponder from a different vehicle is used instead, the immobiliser doesn't recognise it. This makes it possible for the vehicle to be started and stolen. The Range Rover Vogue Ghost Installer immobiliser was created by an South African company at the top of security systems for vehicles technology. It protects you from key cloning or hacking, and even key theft. Only by physically towing your car away could a thief take it away and not be able to drive the vehicle.

Ghost utilizes the buttons of your car, such as the indicator stalk as well as the steering wheel and door panels to generate an unique, changeable PIN code sequence that needs to be entered before you are able to use your car. This is done without any additional hardware, like keys fobs. It can take up to 20 presses. It is also undetectable by equipment for diagnostics and does transmit radio frequency signals, which means thieves are not able to use sophisticated RF scanners or code-grabbing technologies to identify that an installation has been made.

Ghost is more difficult to remove than car alarms that require disarming using the buttons. This makes it a fantastic complement to a GPS tracking device, which can be used to track your vehicle after it's been taken.

Override of emergency PIN code

You don't need to look far on social media sites to find stories or even videos of vehicles that have been taken by thieves using the latest technology tools available to them. Key-cloning devices, for instance, and hacking tools that allow them to start the car without your original keys.

The Ghost immobiliser has been designed to combat this and provide you with an additional layer of security to protect your vehicle from being targeted by thieves. It creates an individual pin code by pushing the buttons on your steering wheel, door panel, and centre console. The unique pin code must be entered in conjunction with your original key fob in order to prevent the vehicle from getting started. The unique override PIN can be found on the black card that you will receive following installation and is easy to remember as there are no LED indications.

The device is hidden inside the vehicle's wires, and does not emit radio signals, therefore it can't be detected by modern thieves with diagnostic software that can detect the type of security system you have installed. This makes it a fantastic alternative to a tracker.

Contrary to most security systems that use a relay inside the engine bay, CANBUS Immobilisers communicate with the car's ECU and BCM via CAN data bus (brand dependent). This allows them to shut down a vehicle completely by sending a digital block to the ECU and engine.

It is also possible to connect an analog immobiliser, alarm or tracker with these systems, however this must be specified before installing the device. They are also compatible with valet/service modes and is a great alternative to a tracking device if you take your car to the dealer for repairs to an electrical issue.

Service/Valet mode

In recent years, there has been an increase in vehicles being stolen without the owners keys. With easy access to key cloning tools and door lock pick sets it is now much easier for thieves to steal your pride and joy. To prevent this from happening, we have launched the Autowatch Ghost immobiliser that prevents your car from being driven despite the fact that your keys have been cloned or your car has been stolen.

It directly communicates with your vehicle's ECU (Engine Control Unit) via the CAN data circuit. It is completely silent because it does not utilize radio frequencies or key fobs. It isn't detected by diagnostics or any other hacking device. It also protects you from adding the new ECU or key to circumvent the system, since only the PIN code allows the engine to be started.

The device is hidden inside your car and is accessible via buttons on your steering wheel, centre console, and door panels. A unique & changeable PIN code sequence up to 20 digits needs to be entered prior to being able to start your car.

This is the first aftermarket CAN bus immobiliser to be designed to stop your car from being driven away or started if a PIN code isn't entered before. If you are driving away with the device armed it will display an indicator on your dashboard and flash continuously for approximately 300m. Entering your PIN code will deactivate the anti-hijack. Your car will continue to run normally. If you don't enter your PIN code at this point, the warning will keep flashing & will require a new PIN code for every attempt to start your vehicle.